Google
COMSOL Modelling: Discussion on Comsol Modelling

Wednesday, November 01, 2006

Discussion on Comsol Modelling

Hello All Comsol users,

This Blog is Created so that all CMOSOL Users can have a webspace for discission and COMSOL Users Across the GLOBE can Join in. We can have Discussions over Specific Issues and it is much easier to keep track of the discussions going on. As ,sometimes it is very Difficult to keep Track of discussions on yahoo group emails and some people might also face problem with there limited account space depending on which email they are using. Here all the COMSOL Users are invited to join this blog and start posting today. Also, if any one has any suggestion people feel free to post it as a comment. To join in as a memeber one just need to sign in using his/her gmail address. Looking forward to see more and more people posting in this blog.

So lets get started.

68 comments:

Unknown said...

Good Job!

I am also looking forward to reading this.
Please post some quick tips for ppl who are new to modelling in comsol.
I am particularly interested in weak formulations

-Jyoti

Fred said...

Good Idea,

Fred

Fred said...

Sometime i get " Error 0 Freedom degree", probably is a stupid question, but how can i solve this issue ?

Fred

Mayur said...

The total number of degrees of freedom is then given by
No of degrees of freedom = (No of nodes)x(No of dependent variables) ---- (i)

You can have a look at the number of elements and the total number of degrees of freedom in the Mesh Statistics dialog box. Just verify is the eqn (i) is true for ur model. I hope that might give you some clue over this problem...if you find the solution do post it on this blog.

C2EC- Swansea said...

Hello Jason, Yeah it was open for any one to join this blog, at the same time I also sent a open Invitation to a large no. of COMSOL yahoo group memebers including you. I sent you an inviation at 'jdeibel@rice.edu', if you have any other email address which you use for blogging, please post it here I will send you a new invitation on that too, so that you can also start contributing to the blog.

Fred said...

I've checked mesh statistics, it's an extrduded mesh with:
172056 Freedom degree
.
.
.
Minimum quality level ~0.4

but when i run the time solver i get the error "
Exception:
com.femlab.jni.FlNativeException: No degrees of freedom to solve for
Messages:
No degrees of freedom to solve for

Stack trace:
at femtime.cpp, row 199, ()
at com.femlab.solver.FlSolver.femTime(Native Method)
at com.femlab.solver.FemTime.run(SourceFile:69)
at com.femlab.server.FlRunner.run(SourceFile:120)


Sorry for the long post
Fred

C2EC- Swansea said...

Hi Fred, Looking at what you have sent it seems something is wrong in time solver setting, you can try changing the solver setting ..I dont know what you are using at the moment, time harmonic solver ...etc but try changing the solver setting...actually if its coupled problem i.e if you are using Multiphysics application then it is possible for you to choose different solver setting for different modules by saving the previous values...have a look at the solver setting may be that will give you some clue...

Jason Deibel - THz Model Man said...

My email address is

jdeibel74 AT gmail.com

Thanks,
Jason Deibel

C2EC- Swansea said...

Hi Jason,
Invitation to join the blog as contributor has been sent to you on your gmail.

Fred said...

I wish to partecipate, if possible.

Fred
gauss.fred AT gmail.com

C2EC- Swansea said...

Hi Fred,

An inviation has been sent to you. Looking forward to your blog.

/C2EC

Fred said...

I'm wondering if exist a way to create a distibuted network to solve some "big" problem not accessible with a single machine.

Fred

C2EC- Swansea said...

Do you mean using COMSOL ....or what ? Probably with COMSOL there will be licensing issues to use it on multiple machines will require a floating license type,,,if you know of any other way post it...

/C2EC

Fred said...

I mean something like Einstein@home
http://einstein.phys.uwm.edu/

But focused on FEM analysis.

Fred

C2EC- Swansea said...

It does seem to be an interesting Idea, I have known about grid computing before www.grid.org. Yeah it can be a novel idea to be used to solve FEM problems. But we need to gather more information how we can proceed for it. Probably it will be nice what other people think about it. I will soon post a blog about it or may be Fred can do that ....and will ask people who have some information about it to share with all of us.

Ser_Ubik said...

Hi! This blog is such a great idea! Please, can you help me with a little issue. I am working with the multiphysics modelling of femlab: Stokes problem. But, I need the matrices of the bilinear form, gradient and divergence to create a matlab program. Could you tell me how can I have this information in the workspace of matlab or how can I use this information to set up a program?

Unknown said...

hi,
I would like to extract the components of K with assemble command. but neither A nor C matrix give any information. Both are zero. Should I set anything or it just does not work?

thanks

Nancy said...

Hi, I am new with the comsol environment and I have a question.

I am using the chemical engineering module (comsol 3.3a) for a rotating newtonian flow.

My question is for the postprocessing. First I make an export to fem. I would like to know how to get the informations I need for some data points in the comsol script. For example I would like to have the pressure at the point x=1.23e-3 and y=1.4e-3.
I tried p(1.23e-3, 1.4e-3) but it does not work.

Nancy

Peter said...

I am trying to change my boundary conditions with each iteration within the comsol scripting/matlab environment. When I use "for t=1:3", it doesn t allow me to use each iterative t value inside any of my boundary condition definitions. What do I need to do?

Pouya said...

Hi,
I am new to Comsol world and I am trying to interact a TM wave with a metalic particle(subwave length).
In defyning the permitivity of the metal I am using Drude's model.
And as soon as the wave reaches the particle the program gies an error.

Can you help me in this regards, or address me who has experineces with the TM aves (Transient form).
Thanks alot

Pouya

Pouya said...

And I forgot:

How can I be subscribed in this Blog?

Raghu said...

can i get any libraries for complex yet standard models like spirals or meanders ?

Mattokun said...

Hello,
I'm glad I found this, since I have some kind of urgent question:
I need to integrate physical models that exist in different "spaces", namely a fluid model in Fluent, a thermal model in some modeling language that I don't know yet, and an electrical system in Matlab/Simulink. I need them to work together in some sort of co-simulation, so eg. the electrical system creates heat, which the thermal system has to transfer to the fluid system, which has to take care of the dissipation/cooling, etc.
Is Comsol capable of doing this, or do all the models need to be represented in comsol? If this is the case, does anyone know another solution to my problem?
Any comment is highly appreciated.
Thanks,
Mattokun

Cath said...

Hi everyone,

I am using COMSOL and trying to solve problems using the level set method for dropets. I am not really an expert in using COMSOL so I will really appreciate if anyone can help me.

Thanks for setting up this website!

Thanks
Cath

seych said...

I am trying to model a heat conduction problem with fluid flow in a very small tube (.00127 cm) with very high temperature gradients at the wall and high flow velocity. The tube is about 40 cm long. The problem I am having with this model is that to model even a fraction of the total length is more than my computational resources can handle. Is there a way that I can model 1cm of this tube, then feed the results back into COMSOL as the initial conditions for the next iteration so that I can have a relatively seemless solution from 1cm-2cm and so forth. And ultimately compile all of the results so that I have the solution for the entire tube?

Cristina Timis said...

Hi!
I am a beginner in working with COMSOL. And I need big help.
I want to ask how can I use a function in defining a global expression.

For example I have several functions, depending on the space: fHx, fBx, fQx =f(x), which I take it from a .txt file.

1. first question
I use them to define some other parameters. I write in global expressions like this:
fvx = fQx(x)/(fHx(x)*fBx(x))
fDx = fBx(x)/(fvx*constant)

COMSOL is computing, but I am not sure is k, because in the end when I want to plot fvx and fDx, form Global variables plot it gives an error: 8032 fvx is not a valid globla expression.
This means that there is the possibility also to compute it wrong along x axis.

2.
I want to calculate a parameter in one point (x=103), depending on the functions I implemented. In global expression I write
c_103 = (fQx(103)*c+constant)/(fQx(103)+constant)

c is the dependent variable of the model.
The expression is computed, but I don't trust is k. The same warning when I try to plot it.

Any suggestions would be of great help!
Regards
Cristina

Cristina Timis said...

I am in big trubble because of this thing.
Thanks in advance for any answer.

Unknown said...

I am working in comsol multiphysics.I want to know how I can model a rectangular block surrounded by a current carrying coil.I want to do it in two dimensional case.Is it possible to do since it is a case of both symmetric and axisymmetric case..Please help me in modelling this...

Anonymous said...

Hi. I´m trying to solve a coupled general heat transfer and weakly compressible Navier Stokes model but it dooesn´t converge. Can you give some possible reasons for this.

C2EC- Swansea said...

HI Martin, you can try few things, try changing the solver settings and try some other solver, like GMRES which one are you using by the way right now. Another reason can be that you need to specify pressure at a point for model to converege check your boundary conditions. This is what I can suggest.

C2EC

Anonymous said...

Hello. I´m back. Thanks for the suggestions. The problem now is that one of my boundary settings is heat flux. If I set a low value, the model converges but if I increase this value, the problem doesn´t converge. Hope someone has any idea about this. Thanks again.

C2EC- Swansea said...

Hi Martin, this is strange !! Such a thing should not happen, as heat flux specification is like setting a source term it shoudnt matter what the value of source is..may be someone else have an idea about it...have u tried playing around with solver setting ?? which solver are you using Direct or CG, GMRES ??

Anonymous said...

No I didn´t change anything in solver settings. The solver is direct(PARDISO). I have the default settings of the non isotermic flow model. Perhaps I should modify something but I am not an experienced user and I don´t know what to change.

C2EC- Swansea said...

hi martin u can fiddle with few things..one of them is solver..in solver choose an iterative solver..there are couple of them in there and u can also set the tolerance vlues try reducing the tolerance..and see if that makes any difference. One other important thing is mesh refinment some time u migt need to refine the mesh. I dont know how ur domain is but it does happens in case of Navier stokes applications. I suggest do following things

1.) Use an iterative solver GMRES or CG

2.) Reduce the tolerance limit and see ur results

3.) Mesh refinement in critical places.

Altough best will be if I can get a look at ur model..but try these first this will help u learn about COMSOL too...

good luck

Raïssa said...

Hi everybody

I'm a new user of COMSOL. And I'm working on a conduction problem, with convective and radiative heat flux at one boundary. The geometry is quite simple: 2D rectangle. But the upper boundary is supposed to be moving with time (the thickness of the rectangle increases with an exponential law).

How do I set a heat flux boundary condition on this boundary and specify at the same time that the boundary is moving??? Should I set two dependant variables (Temperature T and thickness h) instead of just T?

Is it easier to solve such a problem on the Multiphysics interface or should I do it through the script? How?

Please help!!!

Anonymous said...

Hello.
I will try to explain mi problem. I am trying to simulate a lab burner (Meker burner) heating a copper disc placed 50mm above the burner, choosing 2d with axial simmetry and non isotermic flow.
I define the burner with boundary settings. The top of the burner is heat flux (2000 kW/m^2)
and the side surface is isolated.
As I have said before, if I set low value of heat flux(around 1500W/m^2) the problem converges but increasing this value I can´t get a solution.
The mesh: I set free mesh parameters taking care of critical places but I can´t refine too much because of memory requirements (around 8000 elements).
The solver: I tried direct and iterative, even parametric with heat flux as parameter, but for values over 1500 W/m^2 it fails.
On the other hand I set constant values for air properties, using Boussinesq approximation to evaluate density as a temperature function but I guess it isn´t a good approach to real conditions.
So if someone of you has any idea or correction to do I would thank you. Anyway thanks for your help.

C2EC- Swansea said...

Hello Martin,

I will suggest you to post this on Comsol user yahoo group may be some one there can help you with the problem.

Good luck !!

Chaitanya Chintaluri said...
This comment has been removed by the author.
Unknown said...

Hi there, I'm trying to figure out how to solve a more complicated heat transfer question. That is, I have a hollow cylinder with an endcap that is solid. The middle of the cylinder is exposed to very cold temperature via He gas. The ends are exposed to warmer temperatures via N2 gas. This material is rather conductive and I'm having trouble figuring out how to simulate this 3D problem. It'd be really great if you could provide some hints!

C2EC- Swansea said...

Hi, Please post the comment on yahoo group for COMSOL modeling you will be able to get a better help on this matter..good luck

Anonymous said...

Hey, I am trying to solve microfluidic system of two phase flow of air and water.
But, I always meet convergence problem.
I think the mesh is OK because the minimum mesh quality is 0.94.
And I checked artificial diffusion.
The number of dof is about 4000.
What can I do to solve this problem?

My email address is: star1013 at gmail.com

Anonymous said...

Dear friends,
it is good to find such a blog. I think it will contribute to our comsol concerns.
i have recently faced a problem during setting up a comsol 3.4 on an intel quad core windows xp 32-bit system. Any ideas on that?
Nikos

Unknown said...

Hi All,

I am trying to solve a problem where the solutions are expected to be zero for a very long time.

I have refined the mesh with the maximum element size of 0.002 and am using the GMRES method with preconditioning quality of 0.01.

However, inspite of it, the system is unable to process the solution and gives an error for residual computation citing singular matrix as the problem.

Can anyone please suggest some ways to solve the problem?

Anonymous said...

Hello,I am new in comsol. im in problem with solving.How do i solve here?My Project is to compute "Flow past a cylinder at a using comsol."Can any one help?Mail me at nipun0410074@yahoo.com.Please im in great trouble.

Anonymous said...

Hello I just started with Comsol. I needed a help for my research. I am trying to make a model of a brain with two electrodes placed in it. As the conductivity of the brain is 0.2 siemens. By doing this i want to test the electrical characteristics in brain by two electrodes. I jus dont how to model it in COMSOL. If any one can help, It would be highly appreciated by me.

Thanks,
Nitin

Edgard said...

Hi,
I was wondering if anyone knows of a pre-existing open flow model for COMSOL. I'm essentially working on sediment transport for hill-slope processes.
Thanks!

Unknown said...

Hello everyone,

I am using the particle tracing option under post-processing parameters. When I use small particles, around 10e-14 kg, I get a very small displacement line in my fluid flow field. When I make the particle larger the solution shows the particle trace all the way till it is out of the domain, which is the default time step. Does anyone know why there is such a small displacement with smaller particles, it is not physically accurate, especially since the particle should trace all the way out of the domain. I have tried to play with the tolerance values to no avail. Any help would be appreciated. Thank you.

Saheed said...

Hi all,
Pls I'm a new COMSOL user and I have a problem. I have two models: a 2D and a 3D model. I want to use the result from the 2D model as Dirichlet boundary value for the 3D model problem. Any suggestions pls?

Thanks,
Snoppydon.

Anonymous said...

I have a similar question to sloppydon. Need to imput a solution of a 1D problem as a boudnary condition to a 2D problem.

Unknown said...

pls i am looking for how to use comsol to design a 2.4GHz rectangular patch antenna also how to determine the feeding system
thanx & regards

Anonymous said...
This comment has been removed by the author.
Anonymous said...

I am student at KTH sweden.

I need deatil help about the current density setting and how to make coil in matlab and importing to COMSOL.

It will be nice if a crash course of modelling in COMSOL is offerd.

email:hakhan@kth.se

Ivan L. said...

Hi all,

I have one question. Is it possible to model compressible fluids in Comsol 3.5? I've only found weakly compressible Navier-Stokes module.
Thanks.

Regy said...

why the pressure does not change in the k-episilon turbulence in Comsol? I use the boundary conditions on velocity inlet and outlet pressure. What is the best solver settings for this case?

Anonymous said...

I've as a last resort liked things like sand clocks, lava lamps, and the like to kind of just dish out in days of yore staring at it as a formality of catharsis. In a route, it helps me with meditation, to reduce stress and strain and scarcely fantasize in the air nothing. That's why since I was a kid, instead of dolls and cars I've eternally collected more of such pieces like sand clocks, lava lamps, musical boxes etc. So I was most pleased when I establish the[url=http://www.dealtoworld.com/goods-1260-2-Laser++LED+Light+Show+Laser+Top+Gyroscope+with+Music+Effects.html] 2-Laser + LED Inconsiderable Show Laser Outstrip Gyroscope with Music Effects[/url] from DealtoWorld.com under the aegis the Toys section. It's like a melodic box, a spinning better, and a moonlight show all rolled into one. Which is spectacular entertainment! The gyroscope transfer spin object of around a minute. The laser explanation display with accompanying music makes this gyroscope a pretty incomparable bauble that my friends have also been most amused with.

My dogs are also nice-looking intrusive nearly the laser gyroscope I got from DealtoWorld.com. They each follow the gyroscope as it spins, although at earliest they kept barking at the laser slight boast, and also because it produces music. But after they got tempered to it, they've stopped barking but just watch over following the gyroscope whenever I start spinning it. Kids are also pretty amused by it. Off it's moral to maintain fun toys about the blood so that you can desert the small on while the kids are being amused or playing with it while you live provide for food or receive changed. The gyroscope is a particular such toy with this purpose.

The gyroscope I bought from DealtoWorld.com has a dragon as a design on it, and produces a light accompany with red, blue, and unripened colours. Pit oneself against a look at the pictures I've uploaded of the gyroscope with laser light show. The music produced from the gyroscope is not that great but decorous plenty to treat any redone roomer to the house. The gyroscope is red and black, making it look particular coolth, and measure arrogant with that dragon imprint.

The music flare make clear gyroscope runs on 6 LR44 batteries, which are replaceable anyway. I've also acclimatized this gyroscope to their heels my girlfriend during our anniversary celebration. I did the cheesy thing of decorating the pension elbow-room with roses and when I led her in, I started up the gyroscope as well so that the laser light register produces a ideal effect. I also had some battery operated candles so all the sunrise effects created a rather mawkish atmosphere. She loved it, at near the going, to my relief. I also bought the candles from DealtoWorld.com. These days it seems to be my oversight shopping put in favour of all gifts and ideas in compensation fancied occasions.

Since Christmas is coming, this laser light upstage gyroscope can possibly be a momentous Christmas gift for the toddler or in spite of the humour! Alternatively, the gyroscope can really be a kindly reckoning to the traditional Christmas decorations. I can imagine placing it near the Christmas tree and peradventure spinning it when guests reach in the house. Looks like [url=http://www.dealtoworld.com]DealtoWorld.com[/url] is getting my function thus far again!

Anonymous said...

Patrick Willis Women's Jersey axiotakix
Andrew Luck Jersey axiotakix
J.J. Watt White Jersey axiotakix
http://www.authenticnikebuccaneersjersey.com

Anonymous said...

[b][url=http://www.uggsbootsoutletmarket.com/]ugg boots outlet[/url][/b] There are actually dozens of Grand Canyon tour operators, but if you've got your own private automobile consider earning the vacation partially by yourself. There, pleasant guides will shuttle you as many as the rim to the Grand Canyon Skywalk - a horseshoe-shaped glass bridge suspended four,000 toes earlier mentioned the canyon floor. The western rim has no guardrails and enables readers to see the fantastic thing about the canyon with no obstructions..

[b][url=http://www.louisvuittonpursesmarket.com/]louis vuitton bags[/url][/b] For anybody that is considering to acquire any handle on the pal or any relative than absolutely nothing is likely to be a lot better than this special look-alike purses. Within the occasion the rock is minimize they only about each individual exhibit the slight in the special strategy relying on what type of facets are made. Trimmings also influence the Louis Vuitton Artificial Baggage variations, from zips and mass media guys to exclusive louis vuitton germany variations extras and bag casings, The human body and lens considerably too may be louis vuitton work out developed doing the job with sub-standard louis vuitton content and may simply bust and damage the eye region..

[b][url=http://www.louisvuittonhandbagsu.com/]louis vuitton handbags[/url][/b] There are actually, broadly speaking, two classifications for cellular phone scramblers, the two of which can be presently illegal, at least from the United states. Generic or usual telephone scramblers work by jamming the portion of your electromagnetic spectrum on which calls are carried. This is done from the emission of the low-power signal on these very same wavelengths that properly prevents models from speaking with cell towers..

[b][url=http://www.uggsclearancemall.co.uk/]ugg clearance[/url][/b] Use compound physical exercises that could set anxiety on your own central anxious technique (CNS). These exercises can generate wonderful amounts of testosterone and progress hormone through your body. The work outs that i am referring to will be the squat, lifeless elevate, bench push, weight pull-ups, weighted dips and military services presses.

[b][url=http://www.uggsbootsoutletmall.co.uk/]ugg boots[/url][/b] Some coffee retailers limit their menu in order to beverages. Nonetheless, many have discovered that they can enhance revenue by presenting snacks to buyers also. They could be good for your entire body these kinds of as bran muffins. Referred to as for 10th-Century King Harald Bluetooth of Denmark, who unified that region and part of Norway, fashionable Bluetooth expertise unifies disparate digitizer equipment--DVDs, satellite Television receivers, cell phones and their headsets--so they operate efficiently with no physical connectors. The receivers for world-wide placement systems (GPS) are Bluetooth instruments. Applied in every little thing from clinical methods to stereo headsets to surveillance cameras to Apple's PowerBook, Bluetooth has absolutely revolutionized electronic devices..

Anonymous said...

When customers get the chance to save on products in any category of the store[url=http://www.CalvinJohnsonJersey.net]Calvin Johnson Womens Jersey[/url]
then the cheap software discounts will mean simply fast savings that they can benefit from more than once[url=http://www.KevinWalterJersey.com]www.KevinWalterJersey.com[/url]
if other family members check out separately and get the same cheap software discounts at the registerThe Chrysler ad starring Clint Eastwood was inspiring to many Americans for its uplifting message and support for the auto industry that is just starting to grow again Also[url=http://www.BrianUrlacherJersey.net]Brian Urlacher Jersey[/url]
#FaceTime HD camera! Reply · Retweet · Favorite 34 minutes ago via Seesmic·powered by @socialditto div He won the NFL Defensive Player of the Year in 2000 and 2003; he was the sixth player to win the award multiple times
ï»?Charges are not much high iTypically[url=http://www.BrettKeiselJersey.net]Brett Keisel Womens Jersey[/url]
air knives or air blades manufactured for commercial use measure He is also a very physical box player and blitzes the quarterback very wellHow To Fix Computer CrashThe first thing you should do is to download a registry cleaner software and make a free scan on your computer

Anonymous said...

ï»?Khaki colored strips are slightly shorter than standard superstrips and are designed for finishing books using Fastback Hardcovers -Wikipedia Sometimes going to the car wash often is simply not enough and you know that your car is worth more than this This weight loss routine keeps on supplying the required energy calories for your body and thus there isn't any manifestation of fatigue80 ERA to go along with 30 strikeouts Now[url=http://www.nikeindianapoliscoltsshop.com]www.nikeindianapoliscoltsshop.com[/url]
his threshers are available in four different models for different capacity and feature requirementsfavorite > span background-position: -32px 2px;span
Ashlynn Brooke is smoking hot[url=http://www.nikesteelersjerseyshop.com]www.nikesteelersjerseyshop.com[/url]
often nude and she loves football Sanders had a 4 game stretch of 100+ yards rushing and did it 8 times total for the season Traditionally[url=http://www.nikedolphinsshop.com]Kevin Burnett Jersey[/url]
these restrictions have been listed as scope[url=http://www.nikesteelersnflstore.com/nike+shop+heath+miller+steelers+jersey-c-9_38.html]Heath Miller Jersey[/url]
time and costs Just a few more feet[url=http://www.nikenewyorkgiantsstore.com]Jason Pierre-Paul Jersey[/url]
hold on man[url=http://www.nikesaintsjerseystore.com/jahri_evans_womens_jersey]Jahri Evans Jersey[/url]
hold on! He stepped on solid ground[url=http://www.officialnikeravensshop.com]Torrey Smith Jersey[/url]
close enough to shore that the dog finished the rest of the trek on his own Most children do not even play it Like many sports[url=http://www.nikesaintsjersey.com/nike-curtis-lofton-womens-jersey]Curtis Lofton Jersey[/url]
it requires constant movement Some of the bikes are built around custom BMX frames with solid 4-bolt stem

Anonymous said...

You ought to be mindful while choosing to use any of these medications in order to avoid after effects. It isn't possible for a food that you eat to have a negative number of calories, that's just plain impossible phen375 and then, like numerous things, it faded in to the background. Simple changes in diet that remove needless carbs, fried food, and similar items are often all these individuals need to do to increase their lean muscle mass if they already work out. Kids look approximately their parents as role models, so the best method showing them that exercise is vital is for these to exercise http://www.phen375factsheet.com use this workout if you have additional time and wish to really work those legs. Second, don't go on dieting to lose fat or make drastic changes for a regular diet without talking to a medical doctor [url=http://www.phen375factsheet.com]phen375 customer reviews[/url] some with the reasons are on account of differences in metabolism between as well as men and some are due to the differences in environmental factors.

Anonymous said...

Hello. Facebook takes a [url=http://www.casinobonus.gd]blackjack[/url] risk on 888 casino apportion: Facebook is expanding its efforts to institute real-money gaming to millions of British users after announcing a practise with the online gambling chuck 888 Holdings.And Bye.

Anonymous said...

[url=http://www.footballravensprostore.com/haloti_ngata_jersey_super_bowl]Haloti Ngata Jersey[/url] emurbursofs
[url=http://www.patriotsfootballprostore.com/aaron_hernandez_jersey_super_bowl]Aaron Hernandez Jersey[/url] TynckeyncBype
[url=http://www.patriotsfootballprostore.com/aaron_hernandez_jersey_super_bowl]Aaron Hernandez Jersey[/url] Proonseorek

Anonymous said...

Hi there.
Someone in my Myspace group shared this site with us so I came to give it a look.
I'm enjoying the content! Exceptional blog

Also visit my web page :: offshore-company.co

Anonymous said...

just stopping by to say hey

Anonymous said...

http://www.ourhome100.com
http://www.kanglongzmd.com
http://www.ynzbysw.com
http://www.ordoszs.com
http://www.aataja.com
http://www.yaowugu.com
http://www.yijulai.com
http://www.djbacau.com
http://www.abzaco.com
http://www.zengeia.com
http://www.diddeal.com
http://www.bizdoon.com
http://www.libadou.com
http://www.leiouna.com
http://www.fkcello.com

Ufa88kh said...

I blog frequently and I appreciate your information. Your article really impressed me the most. I will bookmark your blog and keep up to date with your latest news
wordpress
blogspot
youtube
ប្រដាល់ថៃអនឡាញ

เกมสล็อต 100 คะแนน said...

เกมสล็อต เล่นเกมสล็อตฟรี ไม่มีคุณค่าใช่จ่ายสำหรับในการเล่น ทดสอบเล่นสล็อต พีจี ฟรีได้เงินจริง โดยเว็บไซต์ ของพวกเรา เล่นสล็อต ทดสอบเล่นฟรี ได้เงินจริงจำต้องเว็บไซต์พวกเรา

ทดลอง เล่นสล็อต pg said...

ทดลอง เล่นสล็อต PG SLOT สมัคร เกมสล็อต เว็บตรง เกมฟรี สล็อต ทดลองเล่นฟรี ถอนได้ แล้ววันนี้ทางเว็บไซค์ได้รวบรวมเกมสล็อตที่น่าสนใจให้ทุกท่านได้ทดลองเล่นฟรีมากกว่า 100 เกม